Ideas for the TJ

[redneck23ms [Veteran Member]]

yes that is what a mml is for. helps driveshaft angle without the loss of belly clearance, but neither should be necessary for just a budget boost. the mml really only comes into play if you want to install a hi-clearance skid plate. since it would raise the tranny/t-case you'd want to use a mml to level it back out and help rear driveshaft angle

[nickjc13 [Veteran Member]]

i just did a budget boost on an lj rubicon last week. the guy ordered it from rubicon express. it had the bumpstop drops. well i think the guy lost one of the boxes because he only had the rear bumpstop relocators but we made dew with 2" body lift pucks.

[mike327 [Veteran Member]]

Get rid of the 35 first, if it has one.

[mdawg4x4 [Veteran Member]]

I am running Skyjacker 2"BB w/extended bump stops, Rancho RSX shocks, and 33X12.50 BFG MT KMs.

Only rub at full flex on rear flares.

[MarkyB [Veteran Member]]

I haven't crawled under the Jeep yet.
Can you put quick disconnects on the rear sway bar?
Would you want to?