VW to Audi sportswagen.

[Brake Weight [Veteran Member]]

Completely backwards in order and video won’t upload. Currently have that 2.5” 90* with o2 bung as a hood stack for now until I can get a proper downpipe made up. All piping were generic kits off fleaBay that I cut and fitted then had welded. Passenger side of intercooler is off a little bit because I didn’t take into account the intake being in the way as I had wanted to go over the uniframe rail. Small flanged 90* with 3/4”(-12JIC) is oil return back to oil pan. Hose is a cut down 4000psi WP hydraulic hose from work. Should last the life of car. If it doesn’t, I have the other end that’s the same length.

[Reserector [Veteran Member]]

I can increase the allowable size for video files, but it's usually best to upload to YouTube and post the link here.

For the photos, are you using Tapatalk? If so, you can set your cursor where you want each pic, then click the pic and select "Insert Inline" and it will put it in the story. It takes some getting used to, but is a good tool.