Project: SAS the FM

[Post Hole [Veteran Member]]

Why didnt you start with the early 70's Bronco D44? Thats what I had on my jeep. It is narrower than the 79's.

[601cherokee [Veteran Member]]

I know another maker that has parts grafted onto the FM...but I'm not allowed to disclose that information.

[Reserector [Veteran Member]]

I know another maker that has parts grafted onto the FM...but I'm not allowed to disclose that information.

I forgot about that.

[Reserector [Veteran Member]]

Why didnt you start with the early 70's Bronco D44? Thats what I had on my jeep. It is narrower than the 79's.

It's like everything else, I work with what I have.

[redneck23ms [Veteran Member]]

I know another maker that has parts grafted onto the FM...but I'm not allowed to disclose that information.

maytag? kenmore?

[Reserector [Veteran Member]]

I know another maker that has parts grafted onto the FM...but I'm not allowed to disclose that information.

maytag? kenmore?

Magic Chef. That's not the one he is busting on me about, though.
Like I said, any brand can be asimilated. A junk pile is man's best friend.

[Antichrysler [Veteran Member]]

Rez I have an opportunity to get you some ford coil towers and radius arm mounts and some 3inch lift springs off of a 91 ford bronco but i need to know asap Here is my cell number text me and let me know tonight cause it may get hauled off before i can get to it tomorrow!
60one319-1164.

[Rangertoy [Veteran Member]]

I really wouldnt use the factory radius arm mounts, and the 80+ ttb upper coil mount wont work with that axle unless you move the shock mounts on the axle, which are made on the radius arms

[Reserector [Veteran Member]]

I'll take whatever you are offering. It may be good for a pattern if nothing else.

[Reserector [Veteran Member]]

Special thanks to Mike327 for hooking me up with a parts axle and some other goodies. Thanks for shortening my shopping list.