Thread Rating:
- 0 Vote(s) - 0 Average
- 1
- 2
- 3
- 4
- 5
need help guys
|
15thMay2010, 08:35 PM,
|
|
RE: need help guys
i have 3 times,so this time im taking advice from rangertoy and am going to replace the pigtail with it it cant hurt anything so why not
|
|
17thMay2010, 06:23 PM,
|
|
RE: need help guys
ok guys i found a new problem walked to the passenger side of the truck while running and it sounded like a 2 cyl deisel so i started looking at the manifold for cracks and low and behold there it was just as plain as day also had a little oil around the valve cover dont know if the gasket was pinched or what so now i wonder if this aint the root of my problem if any one can verify i would be very thankfull
|
|
17thMay2010, 09:04 PM,
|
|
RE: need help guys
Is the valve cover sucking air?
Also, have you checked the intake manifold for leaks with the starting fluid?
|
|
18thMay2010, 06:33 AM,
|
|
RE: need help guys
not yet but i will
|
|
18thMay2010, 09:51 AM,
|
|
RE: need help guys
I wouldnt use starting fluid, carb cleaner works just as well and is no where near as combustible
|
|
18thMay2010, 12:02 PM,
|
|
RE: need help guys
will do ordered a header will be here thursday that will take care of that going to go ahead and install the new coil and then check for vaccum leaks today and see what i can find out
|
|
18thMay2010, 12:05 PM,
|
|
RE: need help guys
(18thMay2010, 09:51 AM)Rangertoy Wrote: I wouldnt use starting fluid, carb cleaner works just as well and is no where near as combustible
But starting fluid might find leaking plug wires, too.
|
|
18thMay2010, 12:08 PM,
|
|
RE: need help guys
ill use the starting fluid idea if it doesnt straiten up and then ill use 601cherokees radiator cap solution
|
|
|