24thMay2005, 11:29 AM
mudcrazy
11thJune2005, 09:11 PM
There should be a fill plug and possibly a drain plug on the T-case somewhere. It is also possible that the T-case has a dampener bolted onto it. If it has the dampener, then you have to unbolt the dampener before you can access the drain and fill plugs. Doesn't say which side the dampener is located on, but it does show a pic of the dampener which appears to be a round piece on a flat plate that is held by four bolts to the T-case.
Hope that helps.
Hope that helps.
v6ford01
15thJune2005, 07:12 PM
Thanks for the info. I am going to try to get the oil changed this weekend.
roxy_33
16thJune2005, 02:27 AM
drivers side t-case if you have a bw13-54 like me...
sorry, I`m thinkin tranny... Its on the rear. no need to unbolt anything.
sorry, I`m thinkin tranny... Its on the rear. no need to unbolt anything.
ufgators
23rdSeptember2005, 08:12 PM
roxy_33 Wrote:drivers side t-case if you have a bw13-54 like me...
sorry, I`m thinkin tranny... Its on the rear. no need to unbolt anything.
That's where the plug for my t/case is.
v6ford01
27thDecember2005, 09:17 AM
To get to the drain plug you must remove the balancer and the plate it is on by removing the four bolts in the plate.