Dad and I changed the water temp sensor and it starts much better when it is hot, and it idles a whole lot better
.Now if we can get the oil pressure it will run like a charm
.
Nope, still got the same old problem we just thought we fixed it.
what are ya workin on, and whats the prob?
The old broncoii is running rich and is hard to start when hot. It acts like a old carb engine when the carb is flooded. Going to change the tfi mod when I get in this week. It's still usable but a pain sometimes. I am going to pull the engine after the meet and rebuild if I am able to make the meet.
o you wil be able to go to the meet trust me dad.
Trust a teenager that makes me very nervous.
w/e a very smart teenager, cough me cough.
I think maybe we got the running rich problem this time. FPR. Going to change in the am and hopfully that will make life a little better.
Why not stick that m38a1 body on the bronco2 chassis then build a roll cage and call it done
Hey Mike this might be the problem! the Crown Vics do the same thing at least the older models do. have to take the air breather off the intake and see if the intake is black and dirty. If it is all you have to do is take some carb cleaner and a small brush and scrub it clean takes some elbow grease but it will do wonders. Ford cannot stand any air flow restrictions and the build up will cause that.Sometimes you have to pull the intake if it is bad dirty.Sorry for not reconizing the symptoms sooner.Hope this helps you out.