Mississippi-Mud Forums

Chris and I did the upper shock hoops last night...gonna do the upper rear... then do the lowers when my shocks come in just to make sure the angle is right....

Also welded up a new exhaust as mine had a hole in it.

I went out and flexed it out at the loading dock now that I am 4wd again... going up it backwards at full flex my brake lines are almost stretched all the way and well the tire rubs on the front a bit... so some sawzall action is needed.

thebab Wrote:going up it backwards at full flex my brake lines are almost stretched all the way and well the tire rubs on the front a bit... so some sawzall action is needed.

On your brake lines! lol j/k

limit staps, who needs um!

Rubbage

Hmmmmmmmmmm........






lol

looks like a wee bit burnt? is that one valve cracked(3rd from left)?

Yes, from cylinder #2 actually.. (the one I am getting 30 compression from) lol....

Hopefully I can get my hands on some new valves tomorrow... if not I'll have to order some from low range.

Hoping that'll fix my issues... and it'll be running good again. (crossing my fingers)

YOW! That cylinder had a bad day.

Apparently an exhaust leak can cause an exhaust valve to do that....

An exhaust leak will lean out the mixture?