Mississippi-Mud Forums

Well I am proud to introduce our newest product, Rim Locks. We are going to cut to types out, one for the hobbist mud bogger to keep the cost down to around $100 per wheel AND you don't have to buy all four if you damage one. These will be made from Plate steel. Will come with all nuts and bolts ready to mount for $400.00



Then we have our professional Rim Locks that are from 6061 T6 Aluminum. This Aluminum is aircraft grade and is as strong a carbon steel but a quarter of the weight. These will go for $800.00 a set with a minimum order of 2. As far as I know we are THE only manufacturer of Aluminum Rim Locks with 6061 T6!

sorry i know little to nothing about atv's ... these are essentially beadlocks for a atv?

yep. but they also make the tires hold very little air so they won't float. hard to get traction when your tires aren't on the bottom.

awesome!!! now i need to my beadlocks cutout HINT HINT

Sounds great to me could you make me some for some 16inch tractor tires for my Samurai?

hey zuk for a set of 15" wheels it takes a full 4x8 sheet with little to no scrap

TOYOGUY Wrote:hey zuk for a set of 15" wheels it takes a full 4x8 sheet with little to no scrap

How many circles are required for a set? A 4' x 8' sheet will yield eighteen 16" x 16" squares (or circles).

Reserector Wrote:How many circles are required for a set? A 4' x 8' sheet will yield eighteen 16" x 16" squares (or circles).

I'll leave tha math to ya'll Ha i was just wondering i think it would be pretty sweet!